Show Product categories

SPARTUS® EasyTIG 208P AC/DC

Jednofazowe

Single phase supply voltage

Cykl pracy AC 35% DC 40%

Device work cycle AC 35% DC 40%

AC / DC

AC / DC

chłodzenie

Chłodzenie – wentylator

TIG HF

TIG HF welding

TIG Lift

spawania metodą TIG z zajarzeniem łuku Lift (przez potarcie)

2t/4t

2T/4T Control

Pulsacja

Puls

Balans

Balance

TIG MMA

TIG and MMA welding

MMA

MMA welding

Hot Start

tzw. „gorący start” – łatwiejsze zajarzenie elektrody otulonej

Arc Force

łatwiejsze spawanie w trudnych pozycjach np. pułapowej

Inwertor

Inwertor

IGBT

IBGT

Package equiped: • Machine SPARTUS® EasyTIG 208P AC/DC • TIG torch SPE 17 1B 4m • Set of consumables • Work clamp • Gas hose • User’s manual

SPARTUS® EasyTIG 208P AC/DC

Product code:

EASYTIG208PACDC-PAK-17-4

Net price:

490.79 €

Add to list:

Index card
Print

LIGHTWEIGHT TIG AC/DC PULS

SPARTUS® Easy TIG 208P AC/DC is a modern digitally controlled inverter welding machine, constructed on the basis of IGBTs. Allows welding TIG AC/DC and MMA AC/DC modes. It is powered with single-phase 230V source power.

Easy-to-use digital control panel provides instant access to the welding machine’s functions.

EasyTIG 208P AC/DC enables two methods of arc ignition:TIG HF (high frequency) and TIG Lift (with scratch ignition). A diagram of TIG parameters on the panel allows for full adjustment:

– gas flow time before and after welding
– up slope and down slope time.

In addition,the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment: base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joining even very thin sheets.

Depending on the welder’s preferences EasyTIG 208P AC/DC can work in 2T or 4T mode.

EasyTIG 208P AC/DC will work useful during welding aluminum, thanks to the smooth balance adjustment in the range 10 – 99%.

MMA welding mode (to 200A) is assisted by functions: Arc Force and Hot Start.

EasyTIG 208P AC/DC is a perfect machine for production and maintenance.

Examples of use: portable repair, workshop, maintenance, constructions.

CONTROL OPTIONS:

Standard foot pedal

Standard foot pedal

Sterowane potencjometrem

Potenciometer in the torch

 

Input~1× 230V ± 10% 50 / 60 Hz
Welding current TIG [A]10 – 200 [AC] 10 – 170 [DC]
Duty cycle TIG [%]AC 35 [200A] DC 40[170A]
Pre-gas [s]0 - 2
Up slope [s]0 - 10
Down slope [s]0 - 10
Post-gas [s]0 - 10
Additional featurespulse, 2T/4T control , MMA welding
Pulse Amps [A][AC] 10 - 200 [DC] 10 - 170
Base Amps [A][AC] 10 - 200 [DC] 10 - 170
Pulse Width [%]5 - 95
Pulse frequency [Hz]0,5 - 200
AC Wave Formssquare
AC balance [%]10 - 99
Contactless pilot arc ignitionLift /HF
Welding current MMA [A]AC 10 - 170 DC 10 - 170
Duty cycle MMA [%]AC 40 [170A] DC 40 [170A]
Hot Start range [A]0 - 10
Arc Force range [A]0 - 10
No-load voltage [V]79
Current consumption [A]28 TIG DC / 33 TIG AC / 41 MMA DC / 39 MMA AC
Power factor (cosφ)0,6
Efficiency η [%]85
Insulation classH
Protection classIP21S
Weight [kg]8,7
Dimensions [mm]450 x 135 x 230
EquipmentPackage
StandardsCE, EN 60974-1

Product categories: MACHINES, AC/DC, TIG

Manual