Ten produkt znajduje się w archiwum

SPARTUS® ProTIG 320PW DC

Trójfazowe

Three phase supply voltage

Cykl pracy 60%

Device work cycle 60%

chłodzenie

Chłodzenie – wentylator

TIG HF

TIG HF welding

TIG Lift

spawania metodą TIG z zajarzeniem łuku Lift (przez potarcie)

2t/4t

2T/4T Control

Pulsacja

Puls

Arc Force

łatwiejsze spawanie w trudnych pozycjach np. pułapowej

Hot Start

tzw. „gorący start” – łatwiejsze zajarzenie elektrody otulonej

TIG MMA

TIG and MMA welding

MMA

MMA welding

Inwertor

Inwertor

IGBT

IBGT

• Device Spartus® ProTIG 320PW DC • Cooler • 4 wheel drive set • 3m work clamp • Gas hose • User’s manual

SPARTUS® ProTIG 320PW DC

Product code:

ProTIG320PWDC

POWERFUL, INVERTOR TIG DC WITH PULSE AND INTEGRATED COOLER

A modern inverter TIG DC welding machine constructed on the basis of IGBT transistors. The high reliability of the device and the resistance to overload have been achieved through the use of high-class components and intelligent source protection systems.

SPARTUS® ProTIG 320P/PW DC enables TIG welding with direct DC current with or without pulse and an MMA coated electrode. The maximum welding current for both methods is 320A with a high 60% duty cycle.

It is a device designed and manufactured for heavy industrial conditions. Allows welding of steel, stainless steel, acid resistant steel, titanium and other weldable alloys in a wide range of material thicknesses. The built-in MCU control system reacts immediately to any changes maintaining stable output parameters, which translates directly to the high quality of the welded joint.

The simple to use and intuitive function panel allows precise control of all the most important welding parameters for TIG and MMA methods. The device has built-in remote parameter control support by means of: a microswitch in the welding torch, with the use of foot control and a dedicated remote control.

SPARTUS® ProTIG 320PW DC model is equipped with an integrated TIG torch cooler. The source and cooler are placed on a specialized transport trolley – creating a stable Tower construction. There is a possibility to mount a large shielding gas cylinder on the chassis. The kit can be removed at any time, eg for carrying out maintenance work.

Examples of applications: industry, renovation works in the field, workshop work, steel structures, production of elements for the food industry.

WIRED FOOT CONTROLER:

wired foot controler

Input~3× 400V ± 10% 50 / 60 Hz
Welding current TIG [A]5 - 320
Duty cycle TIG [%]60[%] 320[A] 100[%] 250[A]
Start Amps, End AmpsYES
Pre-gas [s]0 - 2
Up slope [s]0 - 10
Down slope [s]0 - 10
Post-gas [s]0 - 10
Pulse Amps [A]5 - 320
Base Amps [A]5 - 320
Pulse Width [%]5 - 95
Pulse frequency [Hz]0.5 - 200
Additional featurespulse, 2T/4T control , Output remote control, MMA welding
Welding current MMA [A]5 - 320
Hot Start range [A]0 - 10
Arc Force range [A]0 - 10
No-load voltage [V]77,2
Current consumption [A]TIG 19 / MMA 23
Power factor (cosφ)0,75
Efficiency η [%]85
Insulation classH
Protection classIP23
Weight [kg]73
Dimensions [mm]1060 x 446 x 1100

Product categories: Welding machines, TIG