Show Product categories

SPARTUS® EasyTIG 203P DC

Jednofazowe

Single phase supply voltage

Cykl pracy 60%

Device work cycle 60%

chłodzenie

Chłodzenie – wentylator

TIG HF

TIG HF welding

TIG Lift

spawania metodą TIG z zajarzeniem łuku Lift (przez potarcie)

2t/4t

2T/4T Control

Pulsacja

Puls

Hot Start

tzw. „gorący start” – łatwiejsze zajarzenie elektrody otulonej

Arc Force

łatwiejsze spawanie w trudnych pozycjach np. pułapowej

TIG MMA

TIG and MMA welding

MMA

MMA welding

Inwertor

Inwertor

IGBT

IBGT

Package equiped: • Machine SPARTUS® EasyTIG 203P DC • TIG torch SPE 17 1B 4m • Set of consumables • 3m work clamp • Gas hose • User’s manual

SPARTUS® EasyTIG 203P DC

Product code:

EASYTIG203PDC-PAK-17-4

Add to list:

Index card
Print

EASY TO USE TIG DC WITH PULSE

SPARTUS® Easy TIG 203P DC is lightweight and easy to use TIG DC with pulse. Allows welding TIG AC/DC and modes in 10 – 200A range. It is powered with single-phase 230V source power. The device is equipped with a clear function panel, the operation of which has been reduced to a minimum – a multifunctional knob and two buttons.

Despite its simple structure EasyTIG 203P DC is equipped in advanced functions supporting the welding process in TIG method. A diagram of TIG parameters on the panel allows for full adjustment:

– gas flow time before and after welding
– up slope and down slope time.

In addition, the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment: base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joining even very thin sheets.

Depending on the welder’s preferences EasyTIG 203P DC can work in 2T or 4T mode.

MMA welding mode (to 200A)is assisted by functions: Arc Force and Hot Start.

Thanks to its lightness and handy constructionEasyTIG 203P DC is perfect for outdoor works.

Examples of use: portable repair, workshop, maintenance, constructions.

Input~1× 230V ± 10% 50 / 60 Hz
Welding current TIG [A]10 - 200
Duty cycle TIG [%]60
Start Amps, End AmpsYES
Pre-gas [s]0 - 2
Up slope [s]0 - 10
Down slope [s]0 - 10
Post-gas [s]0 - 10
Pulse Amps [A]5 - 200
Base Amps [A]5 - 200
Pulse Width [%]5 - 95
Pulse frequency [Hz]0,5 - 200
Contactless pilot arc ignitionLift /HF
Additional featurespulse, 2T/4T control , MMA welding
Welding current MMA [A]10 - 200
Duty cycle MMA [%]40
Hot Start range [A]0 - 10
Arc Force range [A]0 - 10
No-load voltage [V]69
Current consumption [A]TIG 32 / MMA 47
Power factor (cosφ)0,6
Efficiency η [%]85
Insulation classH
Protection classIP21S
Weight [kg]7,9
Dimensions [mm]420 × 135 × 240
StandardsCE, EN 60974-1

Product categories: MACHINES, DC, TIG

Manual