Ten produkt znajduje się w archiwum

SPARTUS® EasyMIG 220E Pulse

Jednofazowe

Single phase supply voltage

chłodzenie

Chłodzenie – wentylator

Cykl pracy 60%

Device work cycle 60%

Szpula drutu ø 200mm

Welding wire spool ø 200mm

Podajnik dwu-rolkowy

2-roll gear wire feeder

SYNERGY MIG

SYNERGY MIG

Tryb spawania z pulsacją

Welding with pulsation

2t/4t

2T/4T Control

SPOT

spawanie punktowe SPOT

Indukcyjność

Inductance

Spawanie MIG, TIG oraz MMA

MIG, TIG and MMA welding

TIG Lift

spawania metodą TIG z zajarzeniem łuku Lift (przez potarcie)

Package equiped: • Device SPARTUS® EasyMIG 220E Pulse Synergy • MIG gun SPARTUS® SPE 240 3m(*equipped with a graphite insert) • Electrode holder • Work Clamp • Gas hose • User’s manual

SPARTUS® EasyMIG 220E Pulse

Product code:

EasyMIG220EPulse-Synergy_pak_24-3

Modern, synergistic MIG with pulse current welding function

SPARTUS® EasyMIG 220E PULSE is a modern, inverter welding semi-automatic device. It enables welding with three welding methods: a consumable electrode shielded by inert or active gases (MIG/MAG), a coated electrode (MMA) and non-consumable electrode shielded by inert gas TIG Lift (start arc ignition by scratching). In addition, the device thanks to the ability to change the polarity of welding, enables welding with self-shielding wire without gas. The maximum welding current for all methods is 200A. The unit is powered from single-phase network 230V.

SPARTUS® EasyMIG 220E PULSE is equipped with synergistic programs for MIG / MAG dedicated for welding steel alloys, stainless and acid-resistant steels as well as aluminum. It has a program to welding with self-shielding wire. All parameters are adjusted using an easy to use and intuitive control panel function. Constant output parameters are guaranteed by the use of modern technologies and a high quality wire feeder. The device uses technologically advanced MIG / MAG functions:

  •  welding with pulsation – makes it easy to transfer material to weld pool
  • welding inductance adjustment
  • possibility to choose one of two operating modes 2T/4T
  • SPOT welding
Input~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A]20 - 200
Duty cycle MIG [%]60
Output working voltage [V]15 - 24
Wire feeding speed [m/min]2 - 16
Wire feederbuilt-in, 2-roll gear
Welding wire spool [kg]/[mm]≤5 / 200
Wire diameter ∅ [mm]0.6, 0.8, 1.0
Additional featurespulse, 2T/4T control , TIG lift welding, change polarity, Burn Back, inductance control, synergy, SPOT, synergistic program, gas test, Slow feed
Welding current TIG [A]20 - 200
Welding current MMA [A]20 - 200
Current consumption [A]32,5
Power factor (cosφ)0,85
Efficiency η [%]85
Insulation classH
Protection classIP23
Weight [kg]19
Dimensions [mm]540 x 470 x 245

Product categories: Welding machines, MIG