Ten produkt znajduje się w archiwum

SPARTUS® EasyMIG 185

Jednofazowe

Single phase supply voltage

cykl pracy 35%

Device work cycle 35%

chłodzenie

Chłodzenie – wentylator

Spawanie MIG

MIG welding

Szpula drutu ø 200mm

Welding wire spool ø 200mm

Podajnik dwu-rolkowy

2-roll gear wire feeder

2t/4t

2T/4T Control

Spawanie MIG, TIG oraz MMA

MIG, TIG and MMA welding

TIG Lift

spawania metodą TIG z zajarzeniem łuku Lift (przez potarcie)

MMA

MMA welding

Arc Force

łatwiejsze spawanie w trudnych pozycjach np. pułapowej

Inwertor

Inwertor

IGBT

IBGT

Indukcyjność

Inductance

Package equiped: • EasyMIG 185 device • MIG gun SPARTUS SPE 150 3m • Electrode holder • Work clamp • Gas hose with bands • User’s manual

SPARTUS® EasyMIG 185

Product code:

EASYMIG185-PAK-15-3

LIGHT AND PORTABLE MIG 3 IN 1

SPARTUS® EasyMIG 185 is a modern inverter, semi-automatic welding unit. It supports welding by means of a consumable electrode shielded by inert (MIG) or active (MAG) gases, welding with coated electrode (MMA) and tungsten inert gas (TIG Lift) welding with scratch ignition. The maximum welding current for all three techniques is 180A. The unit is powered from a single-phase 230V network.

The user-friendly control panel allows for instant adjustment of welding parameters depending on the selected technique:

• MIG/MAG welding techniques – stepless adjustment of welding voltage, wire feed rate and inductance.
• MMA welding technique – stepless adjustment of current intensity and Arc Force values (0 – 10)
• TIG Lift – stepless adjustment of welding current intensity and down slope values (0 – 10)

Ultralight and portable EasyMIG welding unit. It is equipped with a two-roller welding wire feeder. In addition, thanks to a capability of polarity change, it supports gas-free self-shielding wire welding.

Exemplary applications: workshop, portable repair, automotive sector.

Input~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A]40 - 180
Duty cycle MIG [%]35
Output working voltage [V]16 – 23
Wire feeding speed [m/min]1.5 – 16.5
Wire feederbuilt-in, 2-roll gear
Welding wire spool [kg]/[mm]≤5 / 200
Wire diameter ∅ [mm]0.6, 0.8, 1.0
Additional features2T/4T control , Arc Force, TIG lift welding, inductance control, brazing (CuSi3), MMA welding
Welding current TIG [A]10 - 180
Duty cycle TIG [%]35
Welding current MMA [A]10 - 180
Duty cycle MMA [%]35
Current consumption [A]MIG 36.8 / MMA 42.9 / TIG 28.8
Power factor (cosφ)0,6
Insulation classH
Protection classIP21
Weight [kg]15
Dimensions [mm]535 x 230 x 410

Product categories: Welding machines, MIG