Single phase supply voltage
duty cycle 30%
Chłodzenie – wentylator
MIG welding
2-roll gear wire feeder
Szpula drutu ø 100
IBGT
Inwertor
SPARTUS® EasyMIG 125 a small welding semi-automatic device, based on IGBT transistors. Enables an cored wire welding (FCAW).
Maximum welding current 100A. The unit is powered from a single-phase network 230V.
Semi-automatic EasyMIG 125 machine has automatic protection functions with intelligent to over-voltage, over-current and over-heat. If any of the above problems occures, the alarm lamp on the front panel will light and output current will be automatically turned off to protect and extend the equipment using life.
Device is equipped with a two-roll welding wire feeder and 1kg/100mm holder spool. MIG welding torch and the earth clamp are permanently installed.
SPARTUS® EasyMIG 125 will work both outdoors and in the field thanks to its small dimensions and the possibility of welding with a self-shielding wire without gas.
Exemplary applications: workshop works, outside site repairs, automotive.
Input | ~1× 230V ± 10% 50 / 60 Hz |
---|---|
Welding current MIG [A] | 40 - 100 |
Duty cycle MIG [%] | 30 |
Output working voltage [V] | 16,5 |
Wire feeder | built-in, 2-roll gear |
Welding wire spool [kg]/[mm] | ≤ 1 / 100 |
Wire diameter ∅ [mm] | 0.8 |
Current consumption [A] | 19,6 |
Power factor (cosφ) | 0,58 |
Insulation class | F |
Protection class | IP21S |
Weight [kg] | 5,8 |
Dimensions [mm] | 410 x 150 x 285 |
Product categories: Welding machines, MIG