Three phase supply voltage
Device work cycle 60%
Chłodzenie – wentylator
Welding wire spool ø 300mm
4-roll gear wire feeder
MIG, TIG and MMA welding
łatwiejsze spawanie w trudnych pozycjach np. pułapowej
tzw. „gorący start” – łatwiejsze zajarzenie elektrody otulonej
Standard equiped: • Device SPARTUS® ProMIG 505 • Separated wire feeder 4R • Cooler • Driving set • 3m mass cable with screw clamp • User’s manual
Standard equiped: • Device SPARTUS® ProMIG 505 • Separated wire feeder 4R • Cooler • Driving set • MIG Gun SPARTUS® SPP 501 • 5m connection cable set • 3m electrode holder • 3m mass cable with screw clamp • User’s manual
SPARTUS® ProMIG 505 is high-end, modern inverter welding machine constructed on the basis of advanced PWM technology and professional IGBT transistors. It enables MIG / TIG DC and MMA welding with a current up to 500A. It is powered from three phase 400V source power. The device offers a wide range of possibilities for the above-mentioned methods of joining metals.
ProMIG 505 is equipped with a synergistic system for MIG / MAG welding with the possibility of selecting the following programs: for mill steel, stainless steel, aluminum welding; self-shielding wire welding and braze welding. It is possible to manually correct the parameters. In addition, the device has a number of functionalities supporting the welding process in the MIG method:
– 2T/4T Trigger Control
– Burn Back
– Slow Feed
– Pre Gas and Post Gas.
Separate high-class four-roller feeder ensures stable wire feeding. An important advantage is also the possibility of welding with the Spool Gun.
Thanks to the solutions used, the ProMIG 505 also enables advanced welding with the TIG Lift method.
ProMIG 505 has functions supporting the welding process in TIG method:
– 2T/4T Trigger Control,
– Down Slope.
The process of joining metals in this method is additionally supported by functions such as:
– Arc Force
– Hot Start.
Modern design and LCD function panel in combination with high-class components makes the SPARTUS® ProMIG 505 stand out on the market.
The professional device of the SPARTUS® Pro line s perfect suited to the production sector and industry.
|Input||~3× 400V ± 10% 50 / 60 Hz|
|Welding current MIG [A]||40 - 500|
|Duty cycle MIG [%]||60|
|Wire feeding speed [m/min]||2 - 24|
|Wire feeder||separated, 4 - roll gear|
|Welding wire spool [kg]/[mm]||≤ 15 / 200/300|
|Wire diameter ∅ [mm]||0.6, 0.8, 1.0, 1.2, 1.6|
|Additional features||spool gun, 2T/4T control , Arc Force, Hot Start, wire test, inductance control, synergy, brazing (CuSi3), MMA welding, built-in liquid cooling system, Pre-gas, Post-gas|
|Welding current MMA [A]||10 - 500|
|Current consumption [A]||MIG 40.5 / TIG DC 32.4 / MMA 41.1|
|Power factor (cosφ)||0,77|
|Efficiency η [%]||90|
|Dimensions [mm]||1100 x 500 x 1460|