Ten produkt znajduje się w archiwum

SPARTUS® MasterMIG 200PFC

Jednofazowe

Single phase supply voltage

chłodzenie

Chłodzenie – wentylator

Cykl pracy 40%

Device duty cycle 40%

Szpula drutu ø 200mm

Welding wire spool ø 200mm

Podajnik dwu-rolkowy

2-roll gear wire feeder

SYNERGY MIG

SYNERGY MIG

Indukcyjność

Inductance

2t/4t

2T/4T Control

Spool Gun

Spool Gun

Spawanie MIG, TIG oraz MMA

MIG, TIG and MMA welding

TIG Lift

spawania metodą TIG z zajarzeniem łuku Lift (przez potarcie)

MMA

MMA welding

Arc Force

łatwiejsze spawanie w trudnych pozycjach np. pułapowej

Hot Start

tzw. „gorący start” – łatwiejsze zajarzenie elektrody otulonej

Wyświetlacz LCD

LCD display

Inwertor

Inwertor

IGBT

IBGT

Standard equiped: • Device SPARTUS® MasterMIG 200PFC SYNERGY3m work clamp • Gas hose • User’s manual

SPARTUS® MasterMIG 200PFC

Product code:

MasterMIG200PFC Synergy

INNOVATIVE, PORTABLE, MULTI-PROCESS, SYNERGISTIC MIG.

SPARTUS MasterMIG 200PFC is a professional, portable, multi-process welding semi-automatic device. It enables MIG/MAG, TIG and MMA welding with maximum welding current of 200A. The unit is powered from a single-phase network 230V.

The device was produced with using of modern solutions such as inverter technology, IGBT power transistors, MCU controller, PWM technology, PFC filter. All of our technology solutions provide stable output performance under a variety of conditions, which has a direct effect on outstanding arc characteristics and welded joint quality.

The device has a number of functions that support MIG / MAG welding processes:

Synergistic MIG/MAG welding mode: 16 dedicated programmes.
Wave Control – precise arc dynamics adjustment Wave control ensures full control over the welding arc: it allows to reduce the amount of welding splashes and controls the width and depth of fusion.
Burn Back – precise adjustment of welding wire burning speed allows limit a risk of sticking the welding wire to the contact tip.
Slow Feed – so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed s of wire feed. Smooth start of wire feed eliminates the risk of welding defects at the beginning of the weld.
2T / 4T – Choice of one of two operating modes.
Spool Gun – possibility of welding with type Spool Gun welding holder.

The MasterMIG 200 PFC also has a number of features that support TIG welding processes (2T/4T mode, current falling speed adjustment, post-gas) and MMA (Hot Start for easier electrode ignition, Arc Force for easier welding in forced positions, VRD lower no-load voltage).

Compact size, special design and high protection of the device housing provide increased resistance to humidity, salinity and corrosion, making it ideal for shipbuilding – minor repairs and site overhaul. Thanks to its excellent parameters, it can also be used for light manufacturing and service work in other industries.

Input~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A]25 - 200
Duty cycle MIG [%]40
Output working voltage [V]15,3 - 24
Wire feeding speed [m/min]2,5 - 16,5
Wire feederbuilt-in, 2-roll gear
Welding wire spool [kg]/[mm]≤5 / 200
Wire diameter ∅ [mm]0.6, 0.8, 1.0
Additional featuresArc Force, Hot Start, TIG lift welding, Burn Back, synergy, synergistic program, brazing (CuSi3), Slow feed
Welding current TIG [A]10 - 200
Welding current MMA [A]10 - 200
Current consumption [A]MIG 28 / MMA 32 / TIG 21
Power factor (cosφ)0,99
Efficiency η [%]85
Insulation classH
Protection classIP23
Weight [kg]17
Dimensions [mm]530 x 215 x 410

Product categories: Welding machines, MIG